A Place for Sharing and Inspiration

Total Pageviews

Showing posts with label Power Apps. Show all posts
Showing posts with label Power Apps. Show all posts

Sunday, September 12, 2021

How to create a new publisher in Dynamics 365


Publishers indicate who developed associated solutions.

there two ways to create a new publisher.

Method #1 create a new publisher in Power Apps

The steps for creating a solution publisher in Power Apps

  1. Go to Power Apps portal, select Solutions on the left side of the page.

  2. On the command bar, select New solution, in the right pane select the Publisher drop down list, and then select + New Publisher.

    image-20210911234127564

    1. In the New Publisher form, enter the required and optional information:

    image-20210911234446011

  • Display Name – required. Enter the display name for the publisher.
  • Name – required. Enter the unique name for the publisher.
  • Prefix – required. Enter the publisher prefix you want, which will normally be used to indicate who did the change to the solution going forward.
  • Choice (Option Set) Value Prefix. This column generates a number based on the publisher prefix. This number is used when you add options to choices and provides an indicator of which solution was used to add the option.
  • Contact Details – Optionally, you can add contact and address information later.

Select Save and Close.

Change a solution publisher in Power Apps

image-20210911235455217

You can change a solution publisher for an unmanaged solution by following below steps:

  1. In the Power Apps portal, select Solutions, select … next to the solution you want, and then select Settings.
  2. In the Solution settings pane, select Edit publisher.
  3. Edit the Display name and Prefix columns to the values you want. The Option Value Prefix column generates a number based on the publisher prefix. This number is used when you add options to choices and provides an indicator of which solution was used to add the option.
  4. In addition to the prefix, you can also change the solution publisher display name, contact information, and address in the Contact Details section.
  5. Select Save and Close.

Method #2: create a new publisher in classic (Legacy) interface

You can create a solution in classic interface, i.e. Settings > Solutions.

image-20210912101711928

then populate those fields highlighted in yellow, then Save or Save and Close

image-20210912102038853

Wednesday, September 8, 2021

How to get started with a Dynamics 365 free trial


Two methods that we can use to get a Dynamics 365 free trial:

  1. Dynamics 365 apps trial

    by this way, we can get CDS database, plus Microsoft pre-built apps (Sales, Services, Marketing, etc.)

  2. Power Apps trial

    through this method, we can only get the CDS database with a few pre-defined core entities, such as Contact, Account, ect)

if you are a beginner, normally, I suggest that you go with the method #1, which will help you get familiar with the existing Apps before you know how to make a app properly using Power Apps.

So in this article, we will show you how to get a Dynamics 365 free trial instance through method #1 (Dynamics 365 apps trial), and below is the steps you have to follow to get there:

Steps for getting a Dynamics 365 free trial instance through method #1

Step 1 Microsoft Official Website for Dynamics 365 free trial

go to https://dynamics.microsoft.com/en-ca/dynamics-365-free-trial/ to sign up, then you will see different apps available on the same page, and you can just choose the first app called Sales, then click on Try for free.

image-20210907233519100

Step 2 How to populate the information on the first page

if you enter the email directly in the textbox under "Enter your email to start your free trial", and click on "Start your free trial", then you will see below information indicated in below red rectangle.

image-20210907235004551

but I suggest that you can just leave text box blank, and click on "Start your free trial" first, then you will see below information

image-20210907235651634

Step 3 Detailed Steps of Applying for a Free Trial

then you will see below information, and text box where you can enter the email that you’d like to use (btw, you can provide your personal email address instead of business email address)

image-20210908000229560

then you will below information, and you can go ahead to click on "Set up account" button.

image-20210908000324104

after that, you can continue to populate below fields accordingly, then click on "Next" (tip: Country or Region is important, as Microsoft will create this trial under the data center where is close to your selection)

image-20210908000742070

then you need to double check the country code and phone number to ensure nothing wrong, and also choose either "Text me" or "Call me". for instance, we will choose Text me, and we will get the verification code through the phone number provided by us,

image-20210908001156022

next, please choose a name for your domain using onmicrosoft.com (this name will be used to create your Office/Microsoft 365 account, and also as a temporary email address for you until your business custom domain is configured), and then check availability(ensure the name is unique), then click on Next if it’s available

image-20210908001800847

then you can populate the name for your user ID, and also double enter the password that you prefer, and then click on Sign up

image-20210908003124123

finally, you can review and confirm the details which you will use to log in later on(tip: you should note them down somewhere in case you will need to use them later when log in again), then you can click on Get Started to start interact with the trial instance.

image-20210908003444976

Step 4 Clear browsing data(optional)

sometime, some of you may have got the trial instance before, and now just try to apply for another one. if that’s the case, you may come across below log-in issue.

image-20210908101650226

then what you have to do is to clear your browsing data (below is a example when doing it from Chrome)

image-20210908101219426

Step 5 How to create a new environment that has a CDS built for it

Once you log in (https://admin.powerplatform.microsoft.com/) successfully, you will see below Power Platform admin center page where you can configure and manage different environments (instances) of Power Platform. You should not use the existing default environment that you see on the page, instead you should create a new environment that will has a CDS (database) configured for it automatically by the Microsoft. so then what you need to do is just click on "+ New" button on the top-left.

image-20210908102257253

after clicking on the New button, you will have to populate the Name field with the name you prefer, and then choose Trial (subscription-based) for the Type field, and also choose the closest location (data center) for Region field. then, clicking on Next at the bottom. (you will see that option "create a database for this environment" greyed out, and being set up "Yes" automatically, which means the CDS for this new environment will be configured automatically).

image-20210908180118232

next, you will have to go through below steps:

  1. choose the Language,
  2. enter the custom domain name you have (otherwise it will use the default one, something like org7a5fae65), which can be changed later on as well.
  3. choose the currency for the entire environment
  4. if you’re a beginner, I suggest that you also enable Dynamics 365 apps
  5. and choose All enterprise applications
  6. finally, click on Save button

image-20210908180915730

at the end, you will see another environment has been created other than the default one. Please note that there is no database behind the default environment.

image-20210908181821449

after above steps, you will be able to start using the Dynamics 365 Apps, such as Sales hub, Customer Service hub, etc.

Sunday, September 5, 2021

Tip – CRM tracking token#(auto-generated) in the reply emails


Scenario:

  1. One of agents sent an email to a client who is an existing Contact in CRM (the tracking token# is also generated automatically)
  2. then the client sent a reply email back to the customer service/support queue (the subject of the email also includes the token#)
  3. once CRM gets the email, CRM will verify the Token# first to see if there is any existing record that has the same token#, if so, CRM just associate it with the existing record, otherwise, the related Record creation and update rule will be triggered

image-20210902120438850